Sony SmartBand2 DIY wristband
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've had a Sony SmartBand2 for 1.5 years now and the original wristband broke a while ago. I didn't want to buy…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I've had a Sony SmartBand2 for 1.5 years now and the original wristband broke a while ago. I didn't want to buy replacement wristband (don't even know if they can be purchased), but decided to see if I could 3D print a replacement that's good enough. For the band I did a search and Emmett's nice openscad module was what I went with and it's working very well.
The unit holder part could be bit more round and bit smaller, but since it's working fine so far, not in a hurry to do anything to it. Maybe later.
The openscad code is here: https://github.com/spegelius/3DModels/tree/master/Smartband2
You'll need emmett's openscad module for generating the links.
The links are generated with following settings:
tol=0.2;
snap=1.2;
T=3;
W=16;//[10:28]
Length=200;
quality=2;//[1:Coarse,2:Fine]
Post-Printing
Printed in PETG. No supports needed.
Category: Sport & Outdoors