Yet another Prusa MK2 feet (flex materials)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had some Filaflex loaded on my Prusa MK2 and after finally getting it to print properly, I wanted to print something…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Had some Filaflex loaded on my Prusa MK2 and after finally getting it to print properly, I wanted to print something at least semi-useful. Having thought about printing better feet for my Prusa, I designed these feet with OpenSCAD and printed. Works well when printed with flexible material, printer quieted down also.
There's one feet that needed a bit of cutting, I'll need to edit that and upload the model
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Notes:
I guess the amount if infill and perimeters depends on the material used. I used 3 perimeters and 15% infill when printed with FilaFlex.
Category: 3D Printer Accessories