propguard for the 56mm frame from T4Bee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, i made this simple propguard for the super ultra tiny 56mm wheelbase frame designed by T4bee. its simple, yet i…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Hi, i made this simple propguard for the super ultra tiny 56mm wheelbase frame designed by T4bee. its simple, yet i found it very effective indoors. the complete propguard is about 3.5-4 grams, depending on your print settings. I mounted it at the top of the esc-fc-receiver stack.
i know its not perfect, but it'll do the job. also i only tested it with the 0703 version of the original frame from T4bee.
questions and advices are welcome :)
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.1-0.2
Infill:
10%
Category: R/C Vehicles