COB LED mount for RC Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this LED mount for a 100x20mm COB LED. you can attatch it to the roof from outside, but it will be high. so i…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Made this LED mount for a 100x20mm COB LED. you can attatch it to the roof from outside, but it will be high. so i simply made a long cut to the top of the windshield, and attatched from inside. You'll need 4-6 pc of M3 screws for attatching the parts for the body. I left the back plate plain, so you can drill the mounting holes as you like. There are 2 different back plates: One is 90 degree and the other is tilted by 22.5 degrees. if you have any questions, feel free to ask.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Category: R/C Vehicles