WLAN Pi R4 Fascia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete your WLAN Pi R4 with a Fascia
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 423
- Wydruki
- 3
- Wyświetlenia
- 1760
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I recommend
- printing these parts at 0.2 mm layer height
- Prusa Orange: Internal Support & Fascia
- Urban Grey: Shim & Vanity Plate (essentials)
You'll also need:
- 3x M2.5mm countersunk machine screws
- 4x M3x4mm countersunk machine screws (black)
Originally I did not include the joystick cap as part of this bundle, in an attempt to avoid complexity and the inevitable disaster that occurs if/when you try to super glue the rubber joystick cap v1 to the square peg of the Waveshare screen and buttons HAT.
In this 2024 ‘refresh’ of the models I now include several variants of the vanity plate.
- vanity plate naked - exposes the 3x buttons completely
- vanity plate essentials - print in place flexible button caps (3x)
- vanity plate - with cutouts for the 3x button rubber piece
I use FiberFlex 40D for the joystick cap v1 and 3x button rubber piece.
~~~
If you would like to support the WLAN Pi project, please consider throwing a few dollars our way to help with hardware purchases (for testing) and developer time. ko-fi.com/wlanpi