1 / 2
Opel 1200 - 1931 - Steering Wheel Horn Button
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend restored a 1931 Opel. The horn button in the steering wheel was missing. This is a 3D-printed alternative.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A close friend restored a 1931 Opel 1200. The horn button in the steering wheel was missing. All the original horn buttons we had available were so badly deteriorate, we could not create a full copy. With this reference, and some pictures of restored cars, we have created a 3D-printed alternative.
The logo used by Opel from 1909 until 1937 is embossed in the knob.
Please use UV and temperature stable filament for your 3D-print. (i.e. PETG, ABS or ASA)
Mounting instructions:
- Screw suitable M3 threaded rods in the base. They should touch the contact-ring in the steering column when the button is pressed (~60 mm).
- Slide springs (from ballpoint pens) over these rods.
- Screw the centre section (with the logo) to the base with a M3 screw. If you don't use glue the logo can be rotated manually.
- Secure the whole assembly to the steering wheel with double sided tape.