1 / 1
Tighterneko (60% Keyboard Case) — zdjęcie 1

Tighterneko (60% Keyboard Case)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zero tolerance model of the popular Bakeneko 60% Keyboard

Ocena
0 / 5
Polubienia
41
Pobrania
516
Wydruki
0
Wyświetlenia
3705
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
BSD License

This model is a zero tolerance remix of the popular Bakeneko 60% keyboard (https://github.com/kkatano/bakeneko-60) by kkatano which is MIT licensed.

Please use this link to see the “official” documentation if you have any questions about the board!

As you need glue to keep the Bakeneko parts together on a high quality printer (actually printing with a 0.1mm tolerance) I modified the models and exported them with zero tolerance.

With the tighter fit you don't have to use glue anymore.

Additionally I added the base Bakeneko 3d printable model as the main repository only includes the splitted model to be printed with PLA, yet not the non-splitted model which would probably fit on a lot of printbeds without the need to print it in separate pieces.

Note

If push-to-fit does not work on your printed parts (e.g. parts are too big to be pushed into each other), print calibration cubes first - your printer might not be able to print with “zero tolerance”.

Print instructions

  • Print calibration cubes first to make sure your printer can print zero-tolerance models

  • Infill: Grid with 15-20%

  • Supports: None

  • Material: PLA (should work with all others too)

Special thanks

To Erland for suggesting that name ;-)

Tagi