1 / 3
FGC-9 FGC-6 Custom hammer pin JIG
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a small jig to help making the hammer pin
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 313
- Wydruki
- 0
- Wyświetlenia
- 1554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
1-9-2023 update
jig added for a DIY 23mm trigger pin.
-
the idea with this JIG is that you can use a extend hammer pin so the force is spread out more evenly over the lower. this pin is made out of a metal rod with a OD of 4mm in a length of 28mm.
in case this made to go with a 3d printed hammer like on the FGC6 then you don’t really need to print and use the jig. side the jig is there so help you make the grove were the detained of the hammer can go to lock in place.