10x STACK Protective face shield Improvement of production
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to be able to print more than just 2 at a time. Specially over the night when everyone is sleeping.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 535
- Wydruki
- 1
- Wyświetlenia
- 3237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
I wanted to be able to print more than just 2 at a time. Specially over the night when everyone is sleeping. I came up with the idea to stack them on top of each other. Instead of 2 you could print 8 during night. If your printer has smaller build plate and you can only print one its also big help for you.
After printing jsut simply peel them away and they will break loose.
Gap between parts is 0,3mm .
There is slight change in position of pins that are for attaching the visor ! they are lifted 4mm with built in support wich is then easily snapped of with flush cutters
Print instructions
0.4mm nozzle
0.3mm layer height for faster printing
30% infil GRID
4 top 3 bot layers
PET-G material
250 hotend / 95 bed
If you want to print less use CUT function to make it smaller.