US Garden Hose Thread connector for "Garden Irrigation Spray System"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A version of the middle section for the Garden Irrigation Spray System that fits US/Canada garden hose threads.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 1153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A version of the middle section for the Garden Irrigation Spray System that fits US/Canada garden hose threads.
It is to be used with this system: https://www.printables.com/model/864-garden-irrigation-spray-system-garten-bewasserung-
And the nut/threads are remixed from this: https://www.thingiverse.com/thing:3684062
I originally just used epoxy to attach the nut to the “GlueEdition” version provided by the original author, but found that there was risk of the glued-joint failing. This lets you thread on a garden hose instead.
The use of male threaded part plus a separate female coupler is used so it prints without supports.
It requires a garden hose washer/gasket so that it does not leak.