Bessey LM2 Clamp Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder is designed to screw into a bottom surface and will hold Bessey LM2 series clamps.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 1106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This clamp holder will hold Bessey LM2 series clamps without having to adjust the clamp. The clamps can be easily installed and removed but are stored in a compact yet accessible manner. There are models to hold 4, 6, and 8 clamps.
It is designed to print with the back face (With the revision mark) of the holder on the print bed, which places all the chamfers on the top.
There are now two version available. A 4 clamp, 6 clamp, and 8 clamp version designed to be mounted to the underside of a piece of wood and now a 4, 6, and 8 clamp version with screw holes to mount into a vertical surface.
It was printed with PETG using a 0.6mm nozzle and 2 perimeters with 15% infill. The design is not very sensitive to settings and would likely work with nearly any combination of perimeters and layers as well as most materials.