Gelatinous Cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Gelatinous Cube draws near! 28mm scaled, so it will take up the standard 2x2 inch grid spacing a Large creature…
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 479
- Wydruki
- 9
- Wyświetlenia
- 1680
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Gelatinous Cube draws near! 28mm scaled, so it will take up the standard 2x2 inch grid spacing a Large creature would.
Both a standard version and a Dragon Quest slime variant are included, because why not?
Edit: There was a request for the Slime Faced cube without bones or bits (Gelatinous CubeDQNobits_fixed.stl)
Edit2: Request for a completely smooth cube with no bits (Gelatinous CubeSmoothNoBits.stl)
Edit3: Added HOLLOW versions of all models for better resin printing and mini encapsulation
Painting suggestion: after painting the cube and the bones/armaments, finish it with a healthy layer of a tinted acrylic gel or gloss medium for that wet goopy look!
If you liked this model and want to show your thanks, you can buy me a coffee!