Toilet Cleaning Block Basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design and 3D print of a basket for toilet cleaning tablets
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 373
- Wydruki
- 4
- Wyświetlenia
- 1866
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
At home, we're making our own tablets for toilet cleaning (environmentally friendly and cheaper). So I designed and 3D printed a basket to put it inside the toilet bowl. Design inspired by another model available here → https://www.printables.com/fr/model/198721-toilet-tank-bleach-tab-holder/comments
Design
From Fusion 360 I designed a simple rectangular block that was extruded and drilled with several holes
I designed as well a separate hook to hang the basket inside the toilet bowl.
The hook is attached (slided) to the basket after printing
The thickness of the hook has been defined to be flexible enough to be bent to be attached (slided) to the basket and strong enough to support the weight of the basket and the tablet itself. That's why I selected PETG material for its softness
I printed several prototypes to find the correct thickness. Test were done with 0.86mm/2 perimeters, 1.28mm/3 perimeters and 1.67mm/4 perimeters. I finally selected the last one (1.67mm/4 perimeters)
And 2 different shapes to fit toilet bowl profile
Printing instructions
Printed in Prusament PETG Urban Grey and Signal White using standard PrusaSlicer parameter with 0.20mm layer height. Other material like PLA will be too rigid and TPU too soft.
No support required.
Basket is printed in its normal position
Hooks are printed on their side
EDIT 15/01/2026
Following comment from a maker, I add a flat version of the hooks, so it can be printed in a more rigid material (like PLA) and bent after on demand using a heat source like hot water
I also published a Hexagon version of the basket just for fun
On top of .stl and .3mf files, I uploaded Fusion 360 .f3d file so you can modify the design and adapt it to your needs
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes
Again the 3D printing shown me that behind the object itself it's more the possibility offered to create useful objects very quickly and at low cost that is interesting
Enjoy
If you like this model, take a look also at my other designs