Prusa Mini - Webcam Bracket [Microsoft LifeCam HD-3000]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cam's aim was to provide the greatest view of the nozzle during the print.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 799
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple Bracket to install a webcam on the Prusa Mini.
WebCam Model: Microsoft LifeCam HD-3000
Its purpose is to offer a clear view of the nozzle and layers. Here's an example of what you could see during printing. Because the Cam is attached to the Z axis, it will layer by layer follow the nozzle throughout the print process.
To be assembled you can follow two ways:
Method 1: With Screw and Knurled Nut (Preferred)
Material needed:
- 1 x M3x25 screw
- 1 x M3xL5xD4 Knurled Nut
The knurled nut will be put into the Cam Clamp's smaller hole, and the clamp will be secured to the motor bracket with the M3x25 screw.
Method 2: Using a screw that is directly inserted into the clamp
Material needed:
- 1 x M4x25 screw
The screw will pass through the larger hole and thread on the clamp's opposite smaller hole, fastening the cam clamp to the motor bracket.