Z32 300ZX 3" Filter to MAF Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adaptor for putting a 3" air filter onto a factory 300ZX Z32 N/A MAF sensor. I'm unsure if the TT uses the…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is an adaptor for putting a 3" air filter onto a factory 300ZX Z32 N/A MAF sensor. I'm unsure if the TT uses the same MAF dimensions. Screw in version has a 7mm hole, mainly designed for using 6mm bolts and nuts, but I may make one with 6mm threads built in, or recesses for the nuts to sit in. My friend already had a 4" adaptor and filter so we just reused the bolts from that, not sure if they were factory or not, but its what we had on hand.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
100%
Filament: Inland ABS Black
Notes:
Printed at 260C with the bed at 90C, in an enclosure, glass bed and gluestick. PETG/PC/Nylon would be fine, also. The more gradual the layer height, the smoother the cone will look, so don't get impatient! It's worth it!
Category: Automotive