1 / 3
Pouring spout for metal petrol/gas canisters - 45mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pouring spout for 45mm dia outlet metal storage cans
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 829
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
Some metal storage cans used for storage of flammable liquids (such as gas/petrol, thinners, paint materials) have a 45mm OD outlet however it's not a DIN45 thread as used on plastic petrol containers, as the thread depth is only about 1mm.
I've made a pourer cap specific to this outlet I've seen used on 2L, 2.5L & 4L metal cans/containers. Straight and angled spouts have been added to the model files.
PETG or ABS filament is recommended since PLA can be dissolved by solvents such as acetone, ethyl acetate, thinners.