Hadley secondary mirror holder M4 slotted bolt (remix) and alignment plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix allows the main secondary mirror bolt to be added and removed without impacting the mirror.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 248
- Wydruki
- 3
- Wyświetlenia
- 2343
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
A Hadley remix for the secondary holder - The secondary bolt and washer are added via a slot without any need to consider the mirror - so you can glue the mirror in place any time you like.
There is also no chance of backing out the secondary holder bolt into the mirror.
Designed for smaller and cheaper M4 metric hardwear.
I added a plate for easier rotation of the holder and adjuster bolt location from the spider. If the plate wears out due to lots of collimation - It is simple and quick to print a new one and replace.
Designed to work with my Hadley M4 JST spider remix
https://www.printables.com/model/266221-hadley-jst-spider-slotted-nut-m4-remix
PETG
0.6 nozzle
0.3 layer height
30% infill
3 perimeters