"Gridfinity Like" Container Frame and Bins that fit IKEA Alex wide Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular storage solution inspired online by Zack Freedman and pmcquay. I modified the scaling to fit Alex drawers.
- Ocena
- 3 / 5
- Polubienia
- 101
- Pobrania
- 810
- Wydruki
- 1
- Wyświetlenia
- 7138
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The original concept by Zack Freedman: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Divider%2520Bins
The more simple/basic version: https://thangs.com/designer/pmcquay/3d-model/gridfinity%2520plain%2520bins-61698?part=1561d28b-90be-4fba-b668-698cd87f93d3
I scaled this up to about 119.05% to get this to fit in a drawer of the Alex model from Ikea. The files are already scaled so in theory it should be plug and play. I print with 0.3m layer height and 10% infill to speed up the printing. Word of caution: these are a snug fit. Don't expect perfect fitting every time as 3D printing isn't perfect. For more forgiveness, consider dropping the scale down a bit. You can post process them if you want but I found that too time consuming. I just place them loosely in the drawer and the compactness holds everything together.
I only have 1x1, 1x2, 1x3, 1x4 and 2x2 versions as that's all I've needed to use so far.