1 / 7
T12 Soldering station case 0.96 inch OLED
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
User thiagohsz did an exellent job creating a casing for a DIT T12 soldering station. However, my T12 controller has a…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
User thiagohsz did an exellent job creating a casing for a DIT T12 soldering station.
However, my T12 controller has a slightly smaller OLED screen, a 0.96 inch one.
I adapted the original design of thiagohsz to accept my controller and built the station exactly like his project.
Two files are included in this project:
- T12_solderstation_096OLED_top.stl - exactly the same as in the original project
- T12_solderstation_096OLED_bottom.stl - changed front to accomodate 0.96 inch controller
Print Settings
Printer:
YAOP (own design)
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Filament:
esun ABS
black / grey
Category: DIY