Kress quick-action lock power connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After having my Kress 1050-1 milling motor converted to trim router with my trim router base (thing 1611593), I needed…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
After having my Kress 1050-1 milling motor converted to trim router with my trim router base (thing 1611593), I needed an extra power cable since the original is integrated in the gantry of my CNC table.
A Kress power cable with a special quick-action lock connector costs about 25 euros incl shipping, which is pretty expensive, so I've made the connector myself.
The quick-action lock connector is used by over 35 Kress tools
What you need:
- This connector printed (duh..)
- Two 6.3mm crimp automotive style connectors female (cable shoes)
- Two M3 20mm screws with nuts
- an redundant PC power cord
- soldering iron
- some hot glue
How you do it:
- Cut of the unused connector of the power cord.
- strip the outer mantle just far enough to be able to poke the 2 wires
through the connector
- crimp AND solder the wires to the cable shoes and push them back in the connector
- use hot glue to secure the wires (and by that the cable shoes stay in place)
- twist the outer cable a few times until the mantle reaches the strain relief
- put the screw and bolt in and tighten
I made a version with strain relief using M3 bolt, but also have included a version
without. The latter was my first version and relies on the hot glue and your common sense :-)
I printed them upright in ABS at 0.2mm with support (which is easy to remove)
Category: Machine Tools