Simple Clip Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very simple to print and use Clip On latch mechanism to work on a 180 degree angle
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 444
- Wydruki
- 3
- Wyświetlenia
- 1386
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Simple Clip Latch
Hi everyone, this is my first upload, hope it goes alright!
After a couple mishaps with my dogs opening the trashbin, and the consequent mayhem, i made this simple clip on latch mechanism, glued it with silicone sealant, and works perfectly. No pics of that, trust me, you don't wanna see my trashbin.
Its a bit stiff, but it comes handy for my purpose, if you need anything easier to release, just sand down a bit of the teeth, and that should do.
Print with supports, as there is a cantilever part to leave clearance for the bag end. PLA 200/50, print time about an hour. SCALABILITY: printed another one 50% bigger, and worked fine too, can't abide for other measures