Small flat automotive interior light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this ceiling light for my camper van. It's a minimalistic design and mounts in a 100mm hole. With 3 mounting…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I made this ceiling light for my camper van.
It's a minimalistic design and mounts in a 100mm hole.
With 3 mounting hooks, it can be secured turning the (M5) screws 90 degrees.
Hooks are made for ceiling panels of 5mm thickness.
You have to print:
- 1 housing
- 1 plate
- 3 mounting hooks
Glue the houding to the case using acetone if printed with ABS of glue otherwise.
The switch used is a regular on/off rocker switch from ebay (search for "On/Off Snap boat Rocker Switch")
The light itself is a small 12V halogen lamp i had laying around
Category: Automotive