Hose pilar 5mm - hose connection 5mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for use in a diy brake bleeder for my car connect a 5mm hose from the bleeding nipple from the car to one of…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 520
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Made for use in a diy brake bleeder for my car
connect a 5mm hose from the bleeding nipple from the car to one of these connections, attached to a jar lid. Connect the other hose pilar on the lid to a small vacuum pump to extract brake fluid.
(I converted a pressure plant sprayer to a vacuum pump)
Brake fluid ends up in the jar, make sure to keep the the brake fluid container filled when extracting.
Make preferable in ABS for strength. You might want to smooth it with Acetone vapor for extra strenght (keep this very short as it will deform the threads)
Made some sealing washers from silicone material. (red on pictures) You could print these from flexible filament :-)
Category: Parts