Filament Sample Rolling Index
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print out your a rolling index and have cards for every major filament type!
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 35
- Wydruki
- 2
- Wyświetlenia
- 390
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
Update: Version 2 is now out. The cards now print in 12 minutes instead of 15, and have clearer tabs. You will need the new holder to fit them. I have redesigned version 1 cards for those that already have the holder printed in the below 3mf, version 1.5 and version 2 are not compatible with each other!
Your rolling Index for cards includes a holder and easy to remove cards in so many many filament types! A holder can support up to 50 cards.
Each card has a tab stating the material type, as well as a spot to write information down. Plus you get a nice honeycomb with different thicknesses for flow testing. Parts print quickly and can be inserted from the front or back of the stand.
Print Recommendations
Holder: 0.15mm - 0.2mm layer height defaults. Print in orientation provided to have smoother rails, can be printed bottom flat though will be a little rougher.
Cards: 0.1 mm layer height defaults.
Included Cards
- PLA
- PETG
- ABS
- ASA
- FLEX
- HIPS
- EDGE
- NGEN
- PVA
- PC
- PP
- PA
- PVB
- PET
- CPE