Seimitsu LS-56 / LS-56-01 Throw Reducer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduces the post actuation throw of Seimitsu LS-56 / LS-56-01 joysticks
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I find the post actuation throw of Seimitsu LS-56 / LS-56-01 joysticks to be too large. Post actuation throw is the distance that the joystick travels after the microswitch has been triggered and until it hits the restrictor.
Once printed, this insert fits between the restrictor and the microswitch PCB and can be fitted with the standard screws. The throw is reduced radially by 1mm and makes the stick stop almost as soon as the microswitch(es) have been triggered.
Printed in PLA at 100% infil.
The insert is compatible with the LS-56 and LS-56-01. The following Seimitsu joysticks share the same size bodies and restrictor. The insert should fit in these but I've not been able to test the throw functionality with them :
LS-58
LS-58-01
LS-60
LS-60-01
Video comparing a stock LS-56-01 and one with the insert.