1 / 1
IEC Power Inlet Cover for VCore-3 (3030 Extrusions)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Retains a snap-in, fused, IEC socket + switch and allows mounting to 3030 extrusions.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 791
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (36)Powiązane
I like the snap-in switched outlets like those used in Voron printers. I wanted something similar for my RatRig VCore-3 build, but I didn't find anything. So I modified the Voron power inlet to allow mounting to two 3030 extrusions. This one is designed for M6 screws on 77mm centers. CAD source is provided if you need to adjust the screw hole diameter or spacing.
I am using it with this power socket: https://www.amazon.com/dp/B08CDTJLN9
For a fully enclosed version, see my other design here.