Bambu Lab AMS Riser Feet (16mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser feet for the Bambu Lab AMS unit, to raise it up to 16mm above the surface (typically the top of the Bambu X1)
- Ocena
- 4,957 / 5
- Polubienia
- 197
- Pobrania
- 1248
- Wydruki
- 26
- Wyświetlenia
- 6987
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a simple model designed for Tiberius (https://www.printables.com/social/289733-tiberius) in order to give a gap of 16mm under the AMS unit in order to fit in additional LED lighting for illumination of the printer build chamber.
The model can be used either way up, either with the existing rubber removed from the AMS and attached into the recess, or with the recess surrounding the standard rubber feet (although additional rubber should be added to the bottom of the part in this configuration.
Be aware that the overhang on this model is 70 degrees. Easy for the X1 to print support free but if printed with a less capable printer some drooping may be experienced.
If you're using a slicer that supports it (like Bambu Studio), use the STEP file. The STL file has however been uploaded as a moderately high triangle model so visual artefacts should not be present on corners even when using this instead.