4FRNT 4-Lock (Hoji Hole) Drill Jig and Tail Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a drill guide for a DIY Hoji Hole to use 4FRNT 4-Lock style skin tails, as well as the tail affixation.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 884
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution
Wanna have a pair of skis with the new 4FRNT tail attachment, because it looks cool and you think it'd be sweet?
Well, it is sweet…and you definitely should. But that means you gotta drill some holes in your skis, and you aint sure how to do that. Welp - here ya go…
This drill jig should be lined up 86cm from the tail (on the 184cm models), drill out all 6 holes, cut the bridges, file flat, seal with epoxy, bobs your uncle.
Additionally, we have included the tail affixation (lock) which can use 1/8th" shock cord to modify a non-4FRNT skin to use on alternative models. This part should be printed in an impact resistant material like: PETG, ABS, ASA, or PC in order to prevent it from breaking while use.
Detailed instructions on to do this located here:
https://www.experiencedgear.net/home/4-lock-diy
Suggested Print Settings:
Drill Jig
3 perimeters, any material you want, at least 20% infill density, 0.2mm layer height.
Tail Lock
3 Perimeters, PETG/ASA/ABS/PC for material, 30% infill density, 0.1mm layer height, w/ supports everywhere.