Lean Shield - Medical protective gear inspired by Prusa RC2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lean Shield, Medical Protecion faceplate is a complete rebuild inspired by Prusa original source files, but designed…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 780
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
Lean Shield, Medical Protecion faceplate is a complete rebuild inspired by Prusa original source files, but designed to be quick to print and use the least amount of material possible.
This should print in around 20-30min and takes about 11g of filament
The Plate shield can be cut from projection mica, just rename the file extension from dxf to pdf (prusaverse does not allow pdfs) or download the blueprints from here: https://a360.co/39i4ZUd
Source files in other formats can be downloaded from the fusion 360 links below:
3D Print Model: https://a360.co/33FVhde
Laser Cut Shield: https://a360.co/39i4ZUd
Print instructions
Supports are not necessary.
- Print is designed for 0.4mm nozzle
- Print at 0.3mm layers
- Make sure you use Surface mode (CURA)
- Set flow to 200% after layer 1
- Use 3x Skirt
- Can be printed in PLA, but not autoclavable
For medical use ideally print it from autoclavable PP, Nylon or PETG.