Protective Face Shield RC2 With Head Strap - For Use With Transparency Film
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified version of RC2 of the Prusa Protective Face Shield that you can use with 8.5"x11" Transparency Film…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 1582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
This is a modified version of RC2 of the Prusa Protective Face Shield that you can use with 8.5"x11" Transparency Film available at any office supply store. Buy it in packs of 100 and drill the holes with a 3/16" bit using the template provided to mark the locations.
Print the Face Shied at 30% Infill in PETG, PLA, ABS or ASA.
Print the Head Strap at 30% Infill in TPU. The head strap can be scaled up or down a bit if you have a head outside of the normal range, but 100% scale should work for many. The head strap has three parts that can be used together to create a custom fit for the strap.
Print the stencil in PLA at 20% infill since it is just for marking your transparencies for drilling.
https://www.prusaprinters.org/prints/25857-protective-face-shield-rc1
Print instructions
Print the Face Shied at 30% Infill in PETG, PLA, ABS or ASA.
Print the Head Strap at 30% Infill in TPU. The head strap can be scaled up or down a bit if you have a head outside of the normal range, but 100% scale should work for many.
Print the stencil in PLA at 20% infill since it is just for marking your transparencies for drilling.