1 / 1
Round 70mm clamp/ring
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original idea was to make a ring for bottles, so they don't clan in my bag, but did not turn out ok.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 234
- Wydruki
- 3
- Wyświetlenia
- 925
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (19)Powiązane
The original idea was to make a ring for my LTT water bottle, so that it does not clank when near other metal bottles in my backpack. However, for some reason I abandoned that idea. Now it serves as a round clamp. The inside diameter is 70mm.
Gcode file is with 30% gyroid infill, on 0.15 Quality preset for Prusa Mini+.
You will need an at least an M15x12mm hex socket bolt and a 8mm nut.
Happy printing!