IKEA HACK: " Lack Rack " table extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension for Lack table leg.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 1390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Extension of the famous Ikea Lack table, in particular this creation was made for the realization of a rack cabinet for my network devices.
Print Settings
Printer: Creality CR10S
Rafts: No
Supports: Yes
Resolution: 0,2
Infill: 100%
Required Hardware
Nothing.
If when the print is finished the piece should fit together, if you want, as I did, I added some glue.
Assembly
Assembly is very simple:
- assemble the table as per Ikea manual;
- remove the chipboard caps that act as a cap to the leg, do not hammer or push, I pierced with with and I removed everything with pliers;
- if you want to put some glue, and insert the printed piece into the space, with a little force but without exaggerating, the leg could break.