Battery Pack for TS 100 (6S)

I made a battery pack for my TS100 soldering-iron.

It is a 6S battery pack made out of 18650 cells.

With the cells I used it should be possible to solder at least 3 hours without a break.

I also used a Lipo Battery Voltage Tester that shows me the voltages and indicates if the pack is empty.

I also used a little switch to connect the Battery Tester to the cells because I did not want it to be provided with power all the time.

I put an XT60 connector on it for charging and discharging and also a Molex Micro fit 8Pin connector for the balancer port.

Cells: https://eu.nkon.nl/rechargeable/18650-size/panasonic-ncr18650b-made-in-japan.html

Lipo Tester: https://www.amazon.de/gp/product/B00H4Y6PY0/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

XT60: https://www.amazon.de/INIBUD-St%C3%BCck-Hochstrom-Stecker-Connector/dp/B01E1LNBG8/ref=sr_1_1?s=computers&ie=UTF8&qid=1516654438&sr=1-1&keywords=XT60

Switch: https://www.reichelt.de/Kurzhubtaster/RAFI-100-503/3/index.html?ACTION=3&GROUPID=7587&ARTICLE=110835

https://www.reichelt.de/Kurzhubtaster/RAFI-167-090/3/index.html?ACTION=3&LA=517&ARTICLE=110852&GROUPID=7587&trstct=lsbght_sldr::110835

Molex Mcro fit: https://www.amazon.de/MX-43025-0800-wire-board-female-terminals-UL94V-0/dp/B01M30P53Z/ref=sr_1_4?ie=UTF8&qid=1516654139&sr=8-4&keywords=molex+micro+fit+8

https://www.amazon.de/MX-43045-0812-Socket-wire-board-tinned-Micro-Fit/dp/B01M9EGTAH/ref=sr_1_11?ie=UTF8&qid=1516654230&sr=8-11&keywords=molex+microfit

Print Settings

Printer:

Anycubic Kossel Linear Plus

Rafts:

Supports:

Yes

Resolution:

Infill:

100%

Category: DIY