Parametric Gridfinity AirPods Pro 1x1 box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Like cmsj's 45-degree AirPods Pro holder, but for people with fake internet OCD and/or an OpenSCAD fetish.
- Ocena
- 4,778 / 5
- Polubienia
- 27
- Pobrania
- 340
- Wydruki
- 10
- Wyświetlenia
- 1432
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I loved the idea behind cmsj's 45-degree AirPods Pro holder, but I wanted to print a model that was a bit more precise. I pulled dimensions from Xials' extremely precise CAD model of the device to make a custom-fit version using kennetek's "Gridfinity Rebuilt" OpenSCAD library.
You can adjust gridz in the OpenSCAD file to your value of choice; the default is 3 units, but values of 2 to 7 are usable. I printed in PLA with a 0.6mm nozzle, 0.35mm layers, and 5% gyroid infill with good results. Thanks to the Gridfinity Rebuilt library, the model includes support-less magnet holes, which worked quite nicely on my first try!