Desktop "Monitor"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some small desktop monitor I've been working on
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
This is work in progress. The project will use a Dayton Audio RS100-8 as a driver. The enclosure fits on a ender 3 sytle printer in 2 parts. It has about 12Liters of volume and will use a ~30x5,3cm port . It is that specific since that is the size of pvc tube I found at my hardware store. the port is now finally added
You can either use 50%+ Infill and waste a lot of hours or use 0-5% vertical only infill, make some small holes ontop and fill the insides of the wall with either Sand or Concrete.
I would also use extra thick walls and top/bottom
Since im not some sort of Designer it would be cool if some of you lads could make redesigns or remixes.
I can add things like threads to screw it in or holes for threaded inserts. Or different sizes for pipes if you give me specific numbers.
Print Settings
Printer:
Elegoo Neptune 2
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
0%
Filament:
Wood Pla to look good
Notes:
I would really use a .6mm Nozzle unless you have 26hours/day maybe even a .8mm