AM43 Beaded Chain Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom gear for my AM43 blind drivers. I had been using the supplied generic beaded chain gear, but found…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 204
- Wydruki
- 0
- Wyświetlenia
- 996
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a custom gear for my AM43 blind drivers. I had been using the supplied generic beaded chain gear, but found them a little noisy. These are much quieter as they exactly mesh with the beaded chain.
My blinds are moved with a metal-beaded chain.
The beads are approx 3.1 mm in diameter
The gap between the beads is approx. 1.54 mm
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Generic PLA White
Notes:
This prints without support.
I used 3 walls.The gear fits on the shaft snugly, and in my case only from one direction, guess that is due to a bit of squishing on the bed making the hole just a little tight on that side.
Category: Household