Anker Soundcore and phone caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I often carry my soundcore and phone around together so that I can stream content to the speaker. This little caddy…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
I often carry my soundcore and phone around together so that I can stream content to the speaker. This little caddy makes it easier to do.
The soundcore slots into the front part of the caddy, and there's a slot behind it that can take my phone, even when in a protective sleeve.
I've kept it relatively thin and light, it's meant only for carrying room to room, so could be made stronger if required.
I had a printing problem when making this that caused a misalignment when printing which can be seen in the photo, but that isn't in the model itself.
Just added V2 which is 1mm narrower and has smooth sides
Print Settings
Printer:
A8
Supports:
Yes
Resolution:
0.2
Infill:
50%
Notes:
I printed this on it's back (handle horizontal) with supports. Removing them from the phone slot with thin pliers. I printed with 1.2mm walls and 50% infill to ensure the handle was strong enough which it seems to be.
Category: Music