1 / 1
Trickle Vent
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've not yet printed this version, but previously tried making this as an assembly, printed in place, the tolerances…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 535
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I've not yet printed this version, but previously tried making this as an assembly, printed in place, the tolerances were too tight, so I've reworked it into this solution.
The slider should be placed into the body with the knob through the hole, then the thin rails should clip into the end slots, there will be a little play to help with movement, but the slider should then slide with the rails as a support behind it.
Category: Household