1 / 2
narrow gauge passenger car (and roof) for use with AJAX NN3 loco — zdjęcie 1
1 / 2

narrow gauge passenger car (and roof) for use with AJAX NN3 loco

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to go with Ajax locomotive previously posted here.

Ocena
0 / 5
Polubienia
0
Pobrania
48
Wydruki
0
Wyświetlenia
575
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Designed to go with Ajax locomotive previously posted here.

I made this carriage to fit the Z gauge wheels made by Rokuhan.

(I have since tried to fit some wheels to this carraige and find that due to shrinkage, or different manufacturing standards, the wheels were too large to fit easily as this elegoo resin is not flexible. This will need some trial and error with sizing depending on the make of "Z gauge" wheel sets. Unfortunately this also means resizing the roof to suit the new dimensions of the carraige.

You can find the wheel sets on ebay as:- "Rokuhan A032 Metal Wheel Set A for Passenger/ Freight Car 4pcs. (1/220 Z Scale)"

I have made the roof-only STL a little more robust compared to the original one which was rather flimsy and it was a real job to remove the supports, not to mention the internal area with supports inside!, so sorry to anyone who downloaded before the alteration.

Print instructions

Print Settings
Printer:
elegoo mars

Rafts:
No

Supports:
Yes

Infill:
too small for infills to matter