Latch for Stanley 014725R Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Was missing some latches from these super useful cases and designed a replacement. I am printing in nylon for…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Was missing some latches from these super useful cases and designed a replacement. I am printing in nylon for strength, and does not require support due to the design. But should be plenty strong with PETG or some PLA as well.
Fits one of these: https://www.amazon.com/Stanley-25-Removable-Compartment-Professional-Organizer/dp/B00005QWYF/ref=as_li_ss_tl?crid=L9UB1HTKS9VS&dchild=1&keywords=stanley+25+compartment+organizer&qid=1599531013&sprefix=stanley+25,aps,149&sr=8-1&linkCode=sl1&tag=acmegeeklabs-20&linkId=1934afc079fc8bf9ad71c832f9a8aea5&language=en_US
Print as oriented to maximize strength as well. Also, there is a small section that should be cut out of the hinge section to clear the support on the case itself. I left them in to make it print without supports. Just use an exacto, razor, or other slim blade to remove.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Category: Replacement Parts