Washer Dryer Knob for GE and maybe others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As they are wont to do, the knob on my dryer broke! The design is pretty weak, so I made a stronger and more stylish…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 284
- Wydruki
- 2
- Wyświetlenia
- 891
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
As they are wont to do, the knob on my dryer broke! The design is pretty weak, so I made a stronger and more stylish one! It will fit on Most GE dryers that have a 6mm diameter knob shaft. (the ones that have a cut out on one side of the shaft)
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.24mm
Infill:
35%
Notes:
The infill needs to be a little higher than normal, at least 35%, so that it won't collapse the walls when turning it. Maybe increase wall shells to 1 above normal.
Category: Replacement Parts