Scissor Holder for Knife Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put your scissors on the side of your knife block!
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 602
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v2.0
This simple part may give your scissors a place in your kitchen, even on those knife blocks with no separate compartment. As it happens, the scissors hang at an angle close to how the knife block is made, which gives it that meant-to-be-like-this look.
I measured my knife block at 105.5mm x 108mm, and added a half mm of spacing to each dimension (0.25mm on each side). This makes for a loose fit, but sits straight enough that I don't need a second contact point up top, and it still looks straight. You'll have to adapt this to the dimensions of your own knife holder.
Printing is straightforward. Print with supports. Fits any printer. Use your normal quality settings and layer height. Mine is made of PLA, and it's fine. No screws no glue, attaches through gravity.