1 / 3
Sherwood PF-1470 turntable record player cover hinge — zdjęcie 1
1 / 3

Sherwood PF-1470 turntable record player cover hinge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I drew up this replacement hinge for fixing Sherwood record player, turntable and was surprised how well it works.…

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
409
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution

I drew up this replacement hinge for fixing Sherwood record player, turntable and was surprised how well it works.

Mine was printed with hotter settings (PLA) to get good strong interlayer bonding, best printed on side for strength with supports everywhere. Use good amount of infill like 70% for strength.

The prototypes withstood a lot of force to get the hinge pin in and they didn't break so plenty strong enough to do the job.

To fit:

Push the pin out of the existing hinge using a screwdriver, be careful not to loose the spring loaded stay inside the hinge or the silver cap to the spring loaded piston as you take it apart. Put new printed hinge in its place and push pin back through.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

Yes

Resolution:

200

Infill:

70

Filament: PolyMaker PLA

Notes:

Use as hot as you can for good bonding.
70% infill.

Print on the face of the U shape so nozzle follows the shape of the U and thus provides better corner strength.

Use Supports everywhere.

Category: Audio

Tagi