20x4 LCD Housing for 18mm MDF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20x4 LCD housing Use M2.5 bolts to screw it in, can drill out for larger M3 if required as bosses are large enough to…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
20x4 LCD housing
Use M2.5 bolts to screw it in, can drill out for larger M3 if required as bosses are large enough to take it.
Designed to hang on the top of an 18mm MDF edge and for the cabling to be taken through the MDF at the rear.
Use small wood screw to secure if required, although it should be a good friction fit too.
I printed face down to get smooth front and minimise support required.
Use supports everywhere when printing.
Print Settings
Printer:
CREALITY CR10
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15% or more
Notes:
Print face down to minimise volume of supports required.
Will need to drill out support from the inside of the bosses.
Category: Other