1 / 5
ATX power supply cutout, screw down mounting bracket — zdjęcie 1
1 / 5

ATX power supply cutout, screw down mounting bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mounting bracket for ATX power supplies. Designed to be minimalistic in its use of material, yet strong enough to…

Ocena
0 / 5
Polubienia
10
Pobrania
314
Wydruki
0
Wyświetlenia
1500
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

A mounting bracket for ATX power supplies.

Designed to be minimalistic in its use of material, yet strong enough to stop the power supply slipping and sliding off a working surface. Also designed to fit the smaller build area of a Printrbot Simple Metal (if no skirt used).

Ideal to mount the ATX power supply in vertical orientation and allows for fixings to screw into base board or similar.

Instructions

Example shown, printed with no supports using PLA.

Just fits inside the Printrbot Simple Metal build area if Skirt set to zero in Cura (or your slicer of choice).

Screw down onto a base and use short length (don't short electric stuff in the power supply) M3 screws into the power supply chassis threaded holes.

Category: 3D Printing

Tagi