Another Doorstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really like Josh-3d's doorstop design, so I decided to make my own version specced to my dorm room.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
After many, many revisions I present my take on Josh3D's doorstop. It is designed to snap into place without any intervention and can be released with one foot.
Printed using PolyTerra PLA, 10% infill, 3 walls at .5mm extrusion width, solid infill every 38 layers, 1.5mm thick top/bottom shell, but honestly it should work fine however you print it (this just makes it stiffer.)
CAD: https://cad.onshape.com/documents/c6f8c5284a743d60816dbca7/w/7829b16297af2ad59552a99f/e/3b3324ad276a7e93613402c2?renderMode=0&uiState=64966395e6d97e19253f6bbd
Leave a comment if you'd like any modifications. If you liked this model post a make it would make my day!