1 / 6
Elegoo Saturn 2 45° + 90° Build Plate Holder — zdjęcie 1
1 / 6

Elegoo Saturn 2 45° + 90° Build Plate Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lets you drip your prints at 45° from the build plate arm and 90° from the side of the vat. Support free print.

Ocena
5 / 5
Polubienia
84
Pobrania
1196
Wydruki
9
Wyświetlenia
6841
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Made this chonky angle build plate holder that will hold the build plate at 45° on the arm and 90° on the vat.  Does not interfere with the thumb screw for mounting the build plate on the arm. If you are printing this from FDM, you shouldn't need brim or supports if your build plate adhesion and filament cooling game is on point. (The toughest part is the lip for the vat holder). The STL's orientation is also picked as the best compromise for layer line strength.

 

Modeled with Onshape, my first time making something complex with this tool.

Shout out to TeachingTech's Video series exploring free to use CAD software.  Onshape was a breath of fresh air after hitting the walls of what you can do with Tinkercad.

 

Support

If this has been helpful to you please consider supporting my effort using the donation button at the top:

I have also created this sticker set perfect for your ultrasonic cleaner:

https://shop.kactuskrunch.com/product/ultrasonic-cleaner-10-sticker-sheet

Tagi