1 / 5
Stand for for an UniFi 6 Lite, nanoHD, or AC Lite — zdjęcie 1
1 / 5

Stand for for an UniFi 6 Lite, nanoHD, or AC Lite

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand to mount UniFi access point upright

Ocena
5 / 5
Polubienia
29
Pobrania
265
Wydruki
4
Wyświetlenia
1393
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Stand to mount UniFi access points upright. Bolt the supplied bracket to the stand using 2 M3 bolts and nuts. You can also use the supplied bolts for the ceiling mount. These are a bit long but you can cut them to length (after putting on the nuts!).

Tested with a UniFi6 Lite. But the nanoHD and AC Lite use the same mounting bracket and should work.

The two holes are 61.7mm apart (why not 62mm? Anyone?).

No support needed. Works fine in PLA.

Included Fusion360 source file. Enjoy.

Tagi