Window holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple window fixture. screw the male part to the window and insert the female part. open the window and hold the male…
- Ocena
- 4,5 / 5
- Polubienia
- 74
- Pobrania
- 156
- Wydruki
- 2
- Wyświetlenia
- 1430
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple window fixture.
- screw the male part to the window and insert the female part.
- open the window and hold the male part against the wall.
- Now close the window (keep male part at the wall) and mark the hole of the male part to the wall.
- Drill a hole into the wall and srew the male part into it.
- For orientation of the two parts along the screw axis see picture.
DONE.
I used PLA and made some more because i thought they would break but they are intact one year after installation and get used quite frequently.
You could also print them in semi flexible materials like PA-CF.
Depending on your windows maybe predrill the screwhole to not damage the frame.
Print Settings
Printer Brand:
Raise3D
Printer:
Pro2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30
Filament: Generic PLA white
Notes:
if aligned properly PLA is stable enough and makes a wonderful "snap" sound at closing
Category: Household