Cats STL Assembled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
That was quite a challenge!.I started with SVG files and used TinkerCad to transform them into STL files. Used Curar…
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 689
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial
That was quite a challenge!.I started with SVG files and used TinkerCad to transform them into STL files. Used Curar 5.1 to resize the final version and slice them.
Then I did several tests to determine the ideal size of each piece and how to assemble them.
That should be a no-brainer but, if you have the time, I advise you to read the original pdf on wolfpaw98's original base of this remix, the file is"cat_-_assembly_instructions.pdf".
After that, I started playing with the size of the parts, temperatures, and dimensions of each part.
It comes out to be 1.6mm (8 layers) so no infill was used. Also, I had several warps and had to play a lot with extruder temperatures and bed temperatures.
I had enormous fun adapting the whole thing together, hope you enjoy it as much as I did
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 S1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
No
Filament: eSun PLA+ Doesn't Matter
Notes:
My personal settings were 208C for the extruder, 59C for the bed, and the speed was 40mm/s and the first layer at 50% speed
Remix:
https://www.thingiverse.com/thing:2259603
Category: Animals